The Enviroguard reusable water filled flood barrier is designed for temporary flood protection, water diversion and water containment in residential, commercial and industrial areas. Place it where needed, fill it with water for ballast and stability, then drain it, roll it up, store it and reuse it.
Because water is the ballast, it is lightweight to handle when empty and a practical alternative to managing large quantities of traditional sandbags.
| Specification | 23.5" W × 5' L | 23.5" W × 10' L | 23.5" W × 20' L | 38" W × 10' L | 38" W × 20' L |
|---|---|---|---|---|---|
| Capacity | 40 gal. per barrier | 80 gal. per barrier | 160 gal. per barrier | 350 gal. per barrier | 700 gal. per barrier |
| Height when filled | 6.5" H | 6.5" H | 6.5" H | 10" H | 10" H |
| Traffic | Vehicle traffic | On request | Vehicle traffic | Non-weight bearing | Non-weight bearing |
| Weight | 1.5 lbs. | 2.48 lbs. | 4.7 lbs. | 4.5 lbs. | 8 lbs. |
Common to all sizes: 10 mil polyurethane, black, sold as 1 each. Temporary/removable barrier. Temperature limit −50°F to 320°F.
Five sizes are available: 23.5 inch wide in 5, 10 and 20 ft lengths with a 6.5 inch filled height, and 38 inch wide in 10 and 20 ft lengths with a 10 inch filled height. Choose the length by the width of the opening or area to be covered.
Yes. After use, drain the water, roll the barrier up and store it until it is needed again. Because it can be filled and drained as required, it avoids the handling of bulky sandbags each time temporary water control is needed.